Industry / Commercial Sector

Chemical fertilizer

1.1

Heat exchanger replacement of urea fertilizer plant

Heat exchanger (waste heat recovery system), whose capacity is equal to 10,000 kJ/h or more

Paper & pulp

2.1

Black liquor boiler

Boiler which burns black liquor and recovers agents such as soda

2.2

De-inking plant

50 TPD or more

Textile and garment

3.1

(1)

(2)

(3)

(4)

Spinning machine

Roving frames with pneuma-less waste collection system

Ring spinning frames with permanent magnet motor

Automatic winder with balloon controller

Air jet spinning

3.2

(1)

(2)

Loom (weaving machine) and warper & sizer

Air-jet loom with technology for reducing both air consumption and air pressure.

Warper & sizer with inverter control (motor should meet the standard which is stipulated in item 9.7.1).

3.3

Sewing machine

Sewing machine driven by directly connected motor. Main driving motor type is to be a servomotor (motor should meet the standard which is stipulated in item 9.7.1)

3.4

Stenter

Stenter controlled by inverter, whose air volume and width of nozzle are adjustable.

3.5

Heat exchanger

Heat exchanger (waste heat recovery system), whose capacity is equal to 10,000 kJ/h or more.

Glass

4.1

Combustion control of glass melting furnace

Combustion control unit controlled by air ratio in exhaust gas.

Cement & Clinker grinding

5.1

Vertical roller grinding mill for cement clinker and slag

A mill is to be equipped with main rollers for grinding materials and sub-rollers for stabilizing materials. Having delivery record of mill with power consumption of less than 29 kWh/ton (mill + separator + fan) at 3,300 cm2/g OPC basis.

5.2

Vertical roller grinding mill for pre-grinding

Having delivery record of mill facility with power consumption of less than 33kWh/ton (pre-grinding mill + ball mill + separator + fan) at 3,300 cm2/g OPC basis.

Iron & steel (rerolling mills)

6.1

Induction furnace

Induction furnace

6.2

Combustion control unit of reheating furnace

Combustion control unit controlled by air ratio in exhaust gas

Foods and beverages (cold storage)

7.1

Screw compressor refrigeration unit

Screw compressor with motor whose capacity is equal to 10 kW or more, including chiller, condensing unit, and cold storage capital machineries (Insulation panel, cooling tower, control panel, pumps, and pressure vessels)

COP>=4.0 @ +3°C (e.g. potato cold storage)

COP>=1.9 @ -25°C (e.g. cold storage in general)

COP>=1.4 @ -35°C (e.g. cold storage in general)

COP>=1.1 @ -40°C (e.g. ice cream factory)

Telecommunication

8.1

Lithium ion battery

When replacing lead/acid battery + captive power generation combination to lithium ion battery

Common Technology

Power receiving and distribution

9.1.1

Transformer

Transformer with amorphous metal core

Water Pump

9.2.1

Pump with inverter

Pump with inverter control, whose motor output is 10 kW or more (motor should meet the standard which is stipulated in item 9.7.1).

Fan and Blower

9.3.1

Fan and blower with Inverter

Fan and blower with inverter control, whose motor output is 10 kW or more (motor should meet the standard which is stipulated in item 9.7.1)

Air Compressor

9.4.1

(1)

(2)

Air compressor

Screw compressor with inverter control, or centrifugal compressor, whose motor output is 10 kW or more.

9.4.2

(1)

(2)

Multi air compressor control unit

Numbers of air compressor is 2 sets or more, equipped with an optimum control system.

Inverter

9.5.1

Inverter

Inverter whose connected motor output is 10 kW or more.

Boiler and steam system

9.6.1

Once-through steam boiler

Steam generation capacity is between 1 ton/h to 4 ton/h. Boiler efficiency is to be 90% or more at rated load.

9.6.2

Multiple installation system of once-through steam boilers

Steam generating capacity of a single boiler is from 1 ton/h to 4 ton/h. Efficiency of a single boiler is to be 90% or more at rated load and the efficiency of total system is to be 80 % or more at 50% load.

Total steam generating capacity is 2 ton /h or more by multiple numbers of boilers.

9.6.3

Economizer for boiler

Exhaust gas economizer

Motor

9.7.1

Motor

Efficiency is IE2 or IE3 specified in IEC 60034

Air conditioner

9.8.1

Air conditioner

1) Centrifugal chiller;

2) Absorption chiller;

3) Variable Refrigerant Flow (VRF) air conditioner whose COP is 4.2 or more;

4) Air cooled chiller, whose COP is 3.0 or more, without using R22 or R123;

5) Water cooled chiller, whose COP is 4.0 or more, without using R22 or R123.

Heat pump

9.9.1

CO2 Heat pump

Motor Capacity is 10 kW or more

COP>= 3.5 ( Hot water supply : heat source=air)

COP>= 5.0 (Cooling + Heating supply)

Lighting

9.10.1

LED lamp

LED lamp with 100 lm/W or more, life time: 40,000 hours or more, number of lamps is 500 or more, and with LED patent license certificate.

Co-generation, tri-generation

9.11.1

Gas engine

Conversion from existing gas engine power generation to gas engine co-generation / tri-generation by utilizing waste heat, whose total rated thermal efficiency is more than 60%.

Maximum capacity per sub-project is 10 MW.

9.11.2

Gas turbine

Gas turbine co-generation / tri-generation, whose total rated thermal efficiency is more than 80%.

Maximum capacity per sub-project is 10 MW.

Waste heat recovery

9.12.1

Once-through steam boiler

Once-through boiler with automatic gas bypass device

9.12.2

Waste heat recovery system

Exhausted heat recovery system, whose capacity is equal to 10,000 kJ/h or more.

Building sector

(Priority will be given to green buildings)

2AZ00

Heat reflective glass

Low-e pair glass and solar reflective glass (solar heat reflective ratio is 50% or more)

2BZ00

Elevator

Elevator with PM motor and LED lighting

2CZ00

BEMS

BEMS, which visualizes a real time energy consumption of the building and controls energy consumption for air conditioning and lighting

2DZ00

Others

Equipment listed in Component I and III are also eligible

Residential sector

(Following equipment to be provided by Participating Distributors (PDs))

3AZ00

Refrigerator

Inverter controlled

(energy efficiency label: 3 stars or more, when the programme is established)

3BZ00

Air conditioner

Inverter controlled

(energy efficiency label: 3 stars or more, when the programme is established)

3CZ00

Others

Further additions are expected in accordance with the establishment of energy efficiency labelling programme